Back to DeLorean Mailing List Page.From: eGroups Digest <dmcnews(AT)egroups.com> To: <digest(AT)dmcnews.com> Subject: dmcnews digest Date: Saturday, December 04, 1999 11:14 AM
eGroups Daily Digest: dmcnews has 23 new messages. Click here http://www.eGroups.com/list/dmcnews/?start=5144 to read them.
----------------------------------------------------------------- 5144. James Espey Re: John DeLorean's Address? 5145. IVe099(AT)aol.com Re: New DeLorean 5146. Matthew Lach Re: Wheels (was Questions???) 5147. magriese(AT)us.ibm.com Re: Questions??? 5148. William T Wilson Re: Questions??? 5149. Sean Spurlock DeLorean underwater? 5150. Marc A Levy Re: New DeLorean 5151. onestop Re: gas flap 5152. Matthew Lach Original Suspension 5153. DeLorean31(AT)aol.com Re: DeLorean underwater? 5154. Marc A Levy Re: Original Suspension 5155. William T Wilson Re: Original Suspension 5156. BRUCE BENSON Re: FAUX Advertizing?? 5157. Deloreanernst(AT)aol.com Re: door handle broke 5158. Danny Smith Re: new store at DMC Houston 5159. Mitchell, Devin Automatic opening gullwing doors?? 5160. DMC83in99(AT)aol.com Need paint codes 5161. Jim Landry Water Pump Replacement 5162. Mike03062(AT)aol.com Re: DeLorean underwater? 5163. Mitchell, Devin Want your VIN rerport run free? 5164. Mitchell, Devin Want your VIN rerport run free 2? 5165. BondAtomic(AT)aol.com Speaking of DeLoreans underwater.... 5166. Ryan Bennett Re: Speaking of DeLoreans underwater.... -----------------------------------------------------------------
------------------------------ message 5144 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5144
In-Reply-To: <28884-3847982D-3595(AT)storefull-145.iap.bryant.webtv.net> References: AFPrep88(AT)aol.com's message of Thu, 2 Dec 1999 17:28:54 EST Date: Fri, 3 Dec 1999 11:55:40 -0500 From: James Espey <james(AT)usadmc.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: John DeLorean's Address? MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
JZD's street address USED to be on the DMC-News website - he requested that it be replaced with his PO Box address for precisely this reason.
James
At 5:15 AM -0500 12/3/99, Danny Smith wrote: >(SNIP) >But please guys, no surprize visits, the poor man has enough problems >
------------------------------ message 5145 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5145
From: IVe099(AT)aol.com Date: Fri, 3 Dec 1999 13:56:57 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: New DeLorean MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Rumors are currently circulating that DeLorean is selling his estate and moving to a much smaller residence in order to have enough money to finance his latest car project. It is confirmed that he is in the prototype stages and has 3 main designs for the new DeLorean. All designs feature gull-wing doors. This news can be exciting if it's true. It'd be great to own a brand new DeLorean. Can anyone confirm why he's selling his estate for sure?
Tom Vin#5588
------------------------------ message 5146 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5146
Date: Fri, 03 Dec 1999 13:58:16 -0500 From: Matthew Lach <mlach(AT)ecs.umass.edu> References: <19991203080436.XZCS21197(AT)delorean> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Wheels (was Questions???) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit
Hi list..
A thought I had on this subject, was to maybe replace the current wheels, with similar wheels, but for lower profile tires..
This would provide a solution to the problem of finding tires that fit the D.
I don't know if this also would affect the fine balance engineering.. Any thoughts on this?
Another problem would be getting wheels that maintain the original look 81' wheel design, in order to maintain the look of the car as much as possible. They would probably have to be custom made (expensive)
Just my two cents, Matt
DMC Joe wrote:
> Installing 15" wheels on the front of the car would completely cancel out > the very fine engineering done by Lotus to compensate for the 35/65 weight > differential. > BTW the rear OEM 15" wheels will not fit on the front of the car. > > Happy Holiday's > DMC Joe / DeLorean Services / <dmcjoe(AT)att.net> > Web Site: <http://www.deloreanservices.com> > > ---------- > > From: Rory A. Robinson <rorx77(AT)aol.com> > > To: dmcnews(AT)eGroups.com > > Subject: [DML] Questions??? > > Date: Thursday, December 02, 1999 11:13 AM > > > > How much does it cost to re-brush a stripped(painted once no bonddoe) > > "D"? > > Who sells rear spoilers for Deloreans? > > Has anyone ever tried factory 15" rims all around? > > > > Thanks > > Rory > > VIN# 3510 > > > > > > ------------------------------------------------------------------------ > > Before posting messages or replies, see the posting policy rules at: > > www.dmcnews.com/Admin/rules.html > > > > To address comments privately to the moderating team, please address: > > moderator(AT)dmcnews.com > > > > ------------------------------------------------------------------------ > > eGroups.com Home: http://www.egroups.com/group/dmcnews/ > > http://www.egroups.com - Simplifying group communications > > > > ------------------------------------------------------------------------ > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator(AT)dmcnews.com > > ------------------------------------------------------------------------ > -- Easily schedule meetings and events using the group calendar! > -- http://www.egroups.com/cal?listname=dmcnews&m=1
------------------------------ message 5147 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5147
From: magriese(AT)us.ibm.com Date: Fri, 3 Dec 1999 12:09:10 -0600 X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Questions??? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit
Rory asked:
>Has anyone ever tried factory 15" rims all around?<
Running the same size wheels on all 4 corners of a DeLorean is a Bad Idea. The wheels and tires are sized to provide handling balance from front to rear. The wheels on the rear are larger to prevent the car from transitioning into oversteer while cornering. The larger size is required because of the rearward weight bias.
The DeLorean is set up to provide understeer during hard cornering (this is true for most any mass produced car). The natural tendency for most drivers in loss of control situations is to press on the brakes. This pitches weight forward, increasing the grip on the front of the car, and unweighting the rears. If the front tires on the DeLorean are larger, the onset of understeer is delayed due to increased grip. If the brakes are applied in a turn (or even if you release the throttle quickly), there is a high probablility that the rear of the DeLorean will step out due to the unweighting of the rear tires, putting you and your car into a nasty spin.
The suspension of your DeLorean was designed by Lotus Engineering, the best suspension engineers in the business. I would recommend against second guessing them.
Michael A. Griese Storage Software Development Manager IBM Storage Systems Division Rochester, MN 55901 Internet: magriese(AT)us.ibm.com voice: (507)253-1853 fax: (507)253-2880
------------------------------ message 5148 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5148
Date: Fri, 3 Dec 1999 14:26:39 -0500 (EST) From: William T Wilson <fluffy(AT)snurgle.org> In-Reply-To: <8265ro$birb(AT)eGroups.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Questions??? MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit
On Thu, 2 Dec 1999, Rory A. Robinson wrote:
> Has anyone ever tried factory 15" rims all around?
That would be a mistake. It would upset the handling of the car, and it would probably look quite silly. If you want to upgrade your wheels, there is a place on the Internet (I don't remember the location, look in the archives) that has custom wheels for the DeLorean. 15" front and 16" rear would probably be a good fit as long as you keep the tire width and outside diameter the same.
------------------------------ message 5149 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5149
From: "Sean Spurlock" <sean_dmc1(AT)hotmail.com> Date: Fri, 03 Dec 1999 13:14:06 PST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] DeLorean underwater? MIME-Version: 1.0 Content-Type: text/plain; format=flowed Content-Transfer-Encoding: 7bit
Hi all,
I thought this might be an interesting story to put on the DML. I
live in Chicago, but my home is in Huntsville, AL. Me and most of my friends
in Huntsville are scuba divers, and rescue divers as well. My friend wrote
me saying he had attended a training excercise on some river in Alabama
where they practice rescuing (or removing) bodies from cars that have
accidently gone into the river (seems to be a big problem in Alabama!).
Anyway, the car used was an old buick that was randomly dropped into the
water and it was left up to the divers to find it. Well, it seems that when
the divers went down they found three cars....two extras that hadn't been
put down! One was a toyota, and the other one couldn't be identified by any
of the other divers (only a few young divers were under the water). My
friend took a look and said it was in about 60ft of water, and half buried
in the mud. He automatically recognized it as a Delorean! He said it looked
like it had been down for years. The stainless was muddy with some slight
surface pitting, but still in good condition. The tires and rear of the car
were buried in the mud, but he said the car looked intact. He tried opening
the door, but it was buried in the mud too far. He looked in side with a
flashlight and said that the seats were missing or had rotted away. Other
than that he said the car was complete. How the hell could this have
happened? A stolen car perhaps? My friend wisely told his team that the car
was really just an old stripped datsun or something, and sent them home. He
wants to salvage the car at least for it's panels. Does anyone know anything
about this car? Anyone lost one? My friend swears this is true. Why would he
lie? Any info or feedback on this?
______________________________________________________
------------------------------ message 5150 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5150
Date: Fri, 03 Dec 1999 16:22:31 -0500 From: Marc A Levy <malevy(AT)dnrc.bell-labs.com> References: <0.714fd89d.25796c79(AT)aol.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: New DeLorean MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit
He is being forced to sell his estate to pay he debts! I dont think there will be much left over when the creditors are done.
The estate auction has been scheduled, and postponed many times. I believe the current schedule date is sometime this month.
The local NJ papers usually have a article hidden on the topic when something happens.
IVe099(AT)aol.com wrote: > > Rumors are currently circulating that DeLorean is selling his estate and > moving to a much smaller residence in order to have enough money to finance > his latest car project. It is confirmed that he is in the prototype stages > and has 3 main designs for the new DeLorean. All designs feature gull-wing > doors. This news can be exciting if it's true. It'd be great to own a brand > new DeLorean. Can anyone confirm why he's selling his estate for sure? >
------------------------------ message 5151 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5151
From: "onestop" <onestop(AT)ic24.net> References: <81p8k7$k576(AT)eGroups.com> Date: Fri, 3 Dec 1999 22:12:09 -0000 X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: gas flap MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit
----- Original Message ----- From: FREDERICK RAHN 3RD <rickaye(AT)webtv.net> To: <dmcnews(AT)eGroups.com> Sent: Saturday, November 27, 1999 6:41 PM Subject: [DML] gas flap
> does anyone know how rare or how many d's were made with the gas flap > and groves in the hood. or how many were made with both the flap and > groves.
I take it no body knows, "couldbe the deloreans fitted with the flap&grooves hood are now becoming harder to come by, making them a uniqe delorean maybe just as much as the right hookers over in the uk.
just me 2cents benn > ------------------------------------------------------------------------ > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator(AT)dmcnews.com > > ------------------------------------------------------------------------ > > eGroups.com home: http://www.egroups.com/group/dmcnews > http://www.egroups.com - Simplifying group communications > > > >
------------------------------ message 5152 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5152
Date: Fri, 03 Dec 1999 17:15:29 -0500 From: Matthew Lach <mlach(AT)ecs.umass.edu> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Original Suspension MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit
hi
A few years back, I heard a rumor that JZD had to change the shocks ofh the US version of the D, to conform to fender requirements.
Is it legal to change back to the original, stiffer, config?
Would this have enough positive effects on handling to warrant the work?
Are there any nasty side effects I should know about, before attempting it?
Thanks, Matt
-- NOTICE TO BULK EMAILER: Pursuant to US Code, Title 47, Chapter 5, Subchapter II, 227, any and all unsolicited commercial e-mail sent to this address is subject to a download and archival fee in the amount of $500 US. E-Mailing denotes acceptance of these terms.
------------------------------ message 5153 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5153
From: DeLorean31(AT)aol.com Date: Fri, 3 Dec 1999 17:41:10 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: DeLorean underwater? MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
I would start by asking him to try to get the VIN number off of it if it all possible
Gary
------------------------------ message 5154 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5154
Date: Fri, 03 Dec 1999 17:52:34 -0500 From: Marc A Levy <malevy(AT)dnrc.bell-labs.com> References: <38484101.FB469D1C(AT)ecs.umass.edu> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Original Suspension MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit
There is a lot of information on this in the back issues.
Most of the DeLorean vendors sell springs to lower the car. I have a set from DMC Houston, and I am happy with them.. The DMC Houston set is a 4 spring set, PJ Grady also sells some springs, but I think they are only for the front. (Call him and check).
The old method to lower the car was to "cut and swap", where you would cut the rear springs, and put them in the front. Move the front springs to the back. When I purchased my car, the previous owner had done this.. The car looked great, but the back was never stiff enough for my liking, the front was a bit too stiff!! (Makes sense the springs were swapped and the weight requirements were different!).
If you want some cut springs I can sell you mine :)
Matthew Lach wrote: > > hi > > A few years back, I heard a rumor that JZD had to change the shocks ofh > the US version of the D, to conform to fender requirements. > > Is it legal to change back to the original, stiffer, config? > > Would this have enough positive effects on handling to warrant the work? > > Are there any nasty side effects I should know about, before attempting > it? >
------------------------------ message 5155 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5155
Date: Fri, 3 Dec 1999 18:01:26 -0500 (EST) From: William T Wilson <fluffy(AT)snurgle.org> In-Reply-To: <38484101.FB469D1C(AT)ecs.umass.edu> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Original Suspension MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit
On Fri, 3 Dec 1999, Matthew Lach wrote:
> A few years back, I heard a rumor that JZD had to change the shocks ofh > the US version of the D, to conform to fender requirements.
Close. The springs were changed to raise the car for bumper and headlight requirements.
> Is it legal to change back to the original, stiffer, config?
Yes. The original configuration isn't stiffer as much as it is lower. Your DeLorean specialist of choice should have or know where to get springs which conform to the original specification.
> Would this have enough positive effects on handling to warrant the work?
It has a very positive effect on the appearance of the car and also improves visibility. The improvement on handling is there, whether it's enough of a difference to warrant the effort probably depends on how you drive the car.
> Are there any nasty side effects I should know about, before > attempting it?
There are a variety of ways to perform the modification. You can lower the car by cutting the springs for example. This is bad. You must also take care when working on the suspension, the parts are under a lot of stress and you can injure yourself or damage things if you are careless. But such a modification is not, in and of itself, harmful.
------------------------------ message 5156 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5156
From: "BRUCE BENSON" <delornut(AT)worldnet.att.net> References: <826iv7$nr8d(AT)eGroups.com> <19991202234209.69948.qmail(AT)hotmail.com> Date: Fri, 3 Dec 1999 17:01:05 -0600 X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: FAUX Advertizing?? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit
I know someone at Borla, and he said that an exhaust > system for the DeLorean has never been designed by them. > > ---Dan
I'm quite sure that Fred Lockett who ran DeLorean Specialties some years back had Borla make up a few DeLorean systems. He used to advertise heavily in DeLOREAN WORLD but I assume he's no longer selling anything.
Bruce Benson
------------------------------ message 5157 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5157
From: Deloreanernst(AT)aol.com Date: Fri, 3 Dec 1999 19:16:14 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: door handle broke MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Metal replacement door handles are available. Check the usual vendors... DMC Houston, PJ Grady. - Wayne
------------------------------ message 5158 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5158
From: DJS912(AT)webtv.net (Danny Smith) Date: Fri, 3 Dec 1999 19:27:14 -0500 (EST) In-Reply-To: "DMC Joe" <DMCJOE(AT)att.net>'s message of Fri, 3 Dec 1999 02:16:22 -0500 X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: new store at DMC Houston MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit
Joe, Your link gets me into the store, then when I click where it says "view items on Ebay" it still only takes me to a place that offers a look at bidders e-mail addresses and bidding history if I type in my Ebay password and e-mail address. I give up (guess I'm not meant to own any of those items). Dan - 7065
------------------------------ message 5159 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5159
Date: Fri, 03 Dec 1999 17:07:30 -0800 From: "Mitchell, Devin" <devin.mitchell(AT)eds.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Automatic opening gullwing doors?? MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit
Has anyone thought of or done a modification to have the gullwing doors automatically? It's my understanding that when the doors are properly configured they should open with very little effort. If an actuator is placed somewhere inside the door frame to push the door a bit after it's unlocked and unlatched, then when that actuator is activated do you think the doors would open up? Used in conjunction with an alarm system that will give you expansion options (e.g. Alpine 8080) I think this might be possible. Just thought I'd throw the idea out there to get others opinions...
Devin Mitchell
------------------------------ message 5160 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5160
From: DMC83in99(AT)aol.com Date: Fri, 3 Dec 1999 21:53:52 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Need paint codes MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Does anyone know the paint codes for the front and rear ? Mine is going in the shop on Monday, and I'd like to make it as easy on the guy as I can. Someone told me it's in the workshop manual, but I'm not sure where. Any help is appreciated!!
Scott #16738
------------------------------ message 5161 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5161
Date: Fri, 03 Dec 1999 19:16:12 -0800 From: "Jim Landry" <jimland(AT)home.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Water Pump Replacement MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit
Has anybody replaced their water pump with a alternate source water pump. One of the Parts Cross Reference lists shows a Carquest 9146 or 9147 pump as a replacement.
Jim Vin#4748
------------------------------ message 5162 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5162
From: Mike03062(AT)aol.com Date: Fri, 3 Dec 1999 23:29:33 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: DeLorean underwater? MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Sean A sunken "D" in an Alabama River <perk>
This sounds like a project that's right up my alley! 20 years ago I salvaged an Amphicar off an abandoned island on Cape Cod. 15 years ago I unsuccessfully tried to raise a sunken Lake Amphibian from a frozen lake in Maine (lost my shirt trying). Anyone ever hear of the Hughes Glomar Explorer? Yup I was there, but even my kids don't believe me about that one! Good luck and keep us informed especially if it has a good left front fender!
DMD in NH (Naah this one will never make it)
------------------------------ message 5163 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5163
Date: Fri, 03 Dec 1999 21:23:23 -0800 From: "Mitchell, Devin" <devin.mitchell(AT)eds.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Want your VIN rerport run free? MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit
Hey all, I just paid for a subscription with carmax so I could run a few VIN reports. If anyone want's me to run their VIN just send it to "devinm(AT)acm.org". I'll need the full 16 digit VIN number (e.g. SCEDT26T7BD002366). My subscription is good until 2/1/2000.
Devin
------------------------------ message 5164 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5164
Date: Fri, 03 Dec 1999 21:28:28 -0800 From: "Mitchell, Devin" <devin.mitchell(AT)eds.com> X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Want your VIN rerport run free 2? MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit
Actually now that I look at it again I've noticed I don't have to use my password, so feel free to run your VIN report yourself. My account name is "devin_mitchell(AT)yahoo.com", and you can access the database from www.carmax.com then click on "account access".
Enjoy!
Devin
------------------------------ message 5165 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5165
From: BondAtomic(AT)aol.com Date: Sat, 4 Dec 1999 00:34:04 EST X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Speaking of DeLoreans underwater.... MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit
Dear Members,
When I met with my friend, a fellow car lover (Mustang), he told me that he saw a DeLorean in a James Bond movie, since "The SuperStation" or TBS, is doing a marathon. It is called "15 Days of 007." He said it went underwater and the wheels came up and a cover came over them. The movie was "The Spy Who Loved Me" and Roger Moore was James Bond. Another friend of mine confirmed this. Can a fellow DMLer confirm this also? I would like to purchase this movie if this is true.
Thanks a lot, John Feldman
------------------------------ message 5166 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=5166
From: "Ryan Bennett" <rpbennet(AT)ix.netcom.com> References: <0.ad375c86.257a01cc(AT)aol.com> Date: Fri, 3 Dec 1999 22:05:22 -0800 X-Mailing-List: dmcnews(AT)egroups.com Subject: [DML] Re: Speaking of DeLoreans underwater.... MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit
John,
That was the infamous submersible Lotus Esprit. Close, but no cigar.
Ryan #1085
> Dear Members, > > When I met with my friend, a fellow car lover (Mustang), he told me that he > saw a DeLorean in a James Bond movie, since "The SuperStation" or TBS, is > doing a marathon. It is called "15 Days of 007." He said it went underwater > and the wheels came up and a cover came over them. The movie was "The Spy Who > Loved Me" and Roger Moore was James Bond. Another friend of mine confirmed > this. Can a fellow DMLer confirm this also? I would like to purchase this > movie if this is true. > > Thanks a lot, > John Feldman > > ------------------------------------------------------------------------ > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator(AT)dmcnews.com > > ------------------------------------------------------------------------ > > eGroups.com home: http://www.egroups.com/group/dmcnews > http://www.egroups.com - Simplifying group communications > > > >
-----------------------------------------------------------------
-- View the full archives, subscribe/unsubscribe, use the group calendar at http://www.eGroups.com/list/dmcnews Manage your subscriptions at http://eGroups.com
Free e-mail groups by eGroups.com.
Back to DeLorean Mailing List Page.
Back to the BackIssues page
Search the back issues.
Having problems with these pages? Have a good idea for the back Issues? Email
me at: backissues(AT)dmcnews.com
Home | Back
Issues | Downloadable Files | Links
| Subscribe
DeLorean FAQ | Clubs
and Events | DeLorean Mailing List FAQ
Copyright ©
2000 DMC-News