Monday, January 4 1999 Volume 03 : Number 463
In this issue:
Re: DML: DeLorean Motor Club
Re: DML: Jubilation!
DML: ok, here's an easy question...
DML: paint removel
DML: Re: Faded louver
Re: DML: A few problems...
Re: DML: Interior Parts
DML: Theft prevention
Re: DML: Legend Turbo setup
DML: SS Exhaust
Re: DML: Re: DeLorean stereo
DML: Another Delorean Poster
Re: DML: DeLorean Motor Club
DML: Delorean Commercial
Re: DML: Delorean and Snow
Re: DML: Delorean and Snow
DML: Re: Delorean and Snow
DML: Re: paint removel
DML: Re: DOC Site Update
DML: Re: Re: Re: DeLorean stereo
DML: Re: Deep South Delorean Club
Re: DML: Delorean and Snow (long)
DML: Matchbox Delorean Model
Re: DML: Theft prevention
Re: DML: Re: DeLorean stereo
DML: Re: Horns - was - Jubilation!
Re: DML: Delorean and Snow
DML: DeLorean and Snow
Re: DML: paint removel
Re: DML: SS Exhaust
Re: DML: Theft prevention
Re: DML: ok, here's an easy question...
DML: Changes over the three years at DMC
DML: Interior specs
DML: Re: Theft prevention
DML: Re: ok, here's an easy question...
DML: CORRECTION
Re: DML: Re: Dash Cover
----------------------------------------------------------------------
Date: Sat, 02 Jan 1999 17:30:26 -0800 From: "lseiler@radiance.com" <lseiler@radiance.com> Subject: Re: DML: DeLorean Motor Club
At 07:58 AM 1/2/99 -0700, you wrote: >One man's opinion: >....Snip................................. As for the money, after you go through >the legal fees to get all the right paper work done ......Snip....... >Remember, also, the the good old DOA threatened legal action on a couple of points. >Attorney's fees to even have those threats examined cost money. ............Snip
reply:
You can say that again. Just finding out what you can or can't do when a legal problem arises can be very expensive. You don't even have to be doing something obviously wrong, just being in existence can be a problem once any one wants to complain or start trouble. It's a shame that this can happen, but happen it does.
Lee
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 02 Jan 1999 18:15:39 -0800 From: "lseiler@radiance.com" <lseiler@radiance.com> Subject: Re: DML: Jubilation!
At 11:13 AM 1/2/99 EST, you wrote: >Fellow DML'ers, > >I experienced my finest moment with good ole 5705 last night! ......Snip................................................ horn that once sounded like Fran Dreshler, Snip................ There is no better feeling than to see this fine automobile >perform at its best. .......Snip.....................
reply:
Hi Jeff,
My vin is 5729 and all most every thing you have dealt with, are the same problems I had with my D. You mentioned the horns........what did you replace the OEM with? I hate mine and want to replace them but have no idea what to get.
Lee
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 2 Jan 1999 21:32:38 -0500 From: Gerald Deutsch <Jerry1@eclipse.net> Subject: DML: ok, here's an easy question...
I now know why my ventilation fans inside don't blow much air. The fan = is a replacement piece (not installed by me) and it spins backwards. It = will spin the right way if I swap the hot and ground wires on the fan = itself. My question is, if I swap them, can this hurt my car in any way? = Because, it would just be reversing the current flow and make the hot = terminal a ground and the ground terminal the hot, right? I'm just = concerned because there are so many ground wires going to the motor. = Does anyone know if this will hurt my car? Thanks. - ---Dan
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 02 Jan 1999 19:27:04 -0800 From: kevin & ann miller <kamiller@alaska.net> Subject: DML: paint removel
I'm new to the Delorean world as I just purchased an 81 with the vin
#4556. I am in the process of removing the paint as it is painted red.
My problem is how to make the stainless look the way it did when it was
new?
Does anybody have any ideas?
Thanks for any help
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 2 Jan 1999 21:59:13 -0500 From: "DMC Joe" <DMCJOE@worldnet.att.net> Subject: DML: Re: Faded louver
D.J., To return your louver to it's original color apply Krylon Semi-flat Black spray paint. Do not substitute another brand of.
DMC Joe / DeLorean Services / dmcjoe@att.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 2 Jan 1999 22:05:47 -0500 From: "DMC Joe" <DMCJOE@worldnet.att.net> Subject: Re: DML: A few problems...
The DeLorean fuel accumulator is a Bosch item not usually stocked by most parts dealers. It is part # 100519G available from PJ Grady for $109.45.
DMC Joe / DeLorean Services / dmcjoe@att.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 02 Jan 1999 23:45:07 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: Interior Parts
Paid $600.00 for my dashboard approx 4-5 years ago. I don't know if they are still available. You should contact one of the dealers. PJ Grady comes to mind, (516) 589-6224.
Paul Gress vin 10193
DeLorean31@aol.com wrote:
> I was searching the archives as well as the major DeLorean parts supplier web > sites for information about the availability and price of parts for the > interior of the DeLorean. I was looking at a pretty decent DeLorean for sale > in my area. However the car sat outside in the sun this past summer and the > dashboard became cracked as well as the steering wheel. Are these items > available for replacement? Also does anyone know how much a dashboard top > would go for roughly? As well as other interior pieces affected by the > sun. Thanks in advance > > Gary
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sat, 2 Jan 1999 22:51:26 -0600 From: "James DeBroeck" <executor@mail.usmo.com> Subject: DML: Theft prevention
A quick question: Does the gullwing design on the DeLorean make it any easier/harder for a = criminal to steal it? I would hate to leave my future purchase in a parking lot for a little = while and return to find it damaged or missing.
James DeBroeck
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 00:22:23 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: Legend Turbo setup
There were a few cars and engines from Legend. I was at the auction but never purchased anything. Right now I know PJ Grady has one car. I saved the auction listing and will dig it out later and see exactly what went.
Paul Gress vin 10193
James DeBroeck wrote:
> I was just reading Stainless Steel Illusion and was wondering if anyone = > on the list has duplicated or knows someone who has duplicated the = > Legend Industries twin turbo setup on their DeLoreans. > Also, did DMC ever sell any of the cars that were modified by Legend? > > Happy New Year > James DeBroeck
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 13:37:18 -0500 (Eastern Standard Time) From: Jim Lill <jpl@vectorbd.com> Subject: DML: SS Exhaust
Here's an interesting page for owners of DeLorean and other older cars:
http://www2.tomato.ne.jp/~pwj/ex.list.html
The Japanese makes it a little tricky but I think the exhuast is made by
PD GOUGH & ASSOCIATE probably a UK outfit
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 10:57:21 PST From: brian_roy@excite.com Subject: Re: DML: Re: DeLorean stereo
Marc (and DMC Joe), I agree with you on the front speakers being 3 1/2" speakers but I am fairly sure the rear speakers are 4 X 10's (which makes them nearly impossible to replace with a quality speaker because no one makes that size any more... WELL except Pioneer)
Brian
> Marc, > There are four speakers, two 3 1/2" units in the dash and two 6X9's in > the interior rear quarter panels. > > DMC Joe / DeLorean Services / dmcjoe@att.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 13:55:05 -0500 From: "Michael E. Rogers" <TearsForFears@dol.net> Subject: DML: Another Delorean Poster
Hey guys...
Don't know if you're already aware of this, but I've found another Delorean Poster for sale on the net!
http://www.autotrend.com/delorean.html
The price is $29.95 Poster size is 24" x 36"
Take care, MER - -- ~~Michael E. Rogers ~~"Shout, Shout, Let it all out..." ~~The Big Chair :http://www.dol.net/~TearsForFears ~~Ike's Chair :http://www.dol.net/~TearsForFears/ikemain.html ~~Cumulus Broadcasting:http://www.delmarvaradio.com ~~Talk Radio 92.7 WGMD:http://www.wgmd.com ~~Rogers Graphics Inc.:http://www.rogersgraphics.com ~~"...These are the things I can do without."
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 99 12:58:30 -0000 From: James Espey <espey@dmcnews.com> Subject: Re: DML: DeLorean Motor Club
The indomitable raddad, Dick Ryan, wrote:
>One man's opinion: > >The club is dead! That's too bad because I had high hopes for an >alternative to the DeLorean Owners Association. I think it died for a >couple of reasons. While the two gentlemen who were the primary forces >behind the proposed club are nice people (I know them both), they were not >the right people to get something of this magnitude off the ground without >substantial help. And, like the DOA, they didn't want anyone else's >input on matters that matter.
Several capable DML'ers offered the new DeLorean Motor Club a "jump-start" in getting off the ground. They were ignored and later smeared in correspondence from the DeLorean Motor Club "leadership". I, too, was very sorry to see an alternative to the DOA fail. Not only because competition is healthy, but because now Kjell and Robin have now made it nearly impossible for another "alternative" club to be formed and succeed.
James Espey #10570
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 14:58:33 -0500 From: "James Fay" <jfjr@hotmail.com> Subject: DML: Delorean Commercial
Hi Everybody,
I used to have a 1981 Delorean commercial and I was wondering if anyone = has it or knows where I can get it. Thanks.
James Fay jfjr@hotmail.com http://www100.cjb.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 14:58:50 -0500 From: allsun <allsun@mediaone.net> Subject: Re: DML: Delorean and Snow
The key is using the right tread and compound for tires. The D is very clean underneath and leaves a track like a bobsled.
Scott Tester wrote:
> I have always wondered, how well does the DeLorean perform in snow and > ice? > I figure since it is a rear engine - rear wheel drive that it would do > very > well. I know that most of you put the D away for the winter, but if anyone > has any particular stories please share them.. > > Scott Tester testersd@helicon.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 14:57:31 -0600 (CST) From: jameel a ahed <ahed@students.uiuc.edu> Subject: Re: DML: Delorean and Snow
Dear DML, I drive my car all of the time. I try not to drive the car when there is snow and salt on the ground. In an emergency I had to drive it on an inch of snow and the car did not drive well at all. Even though you have the engine on the back the tires spin easily. You must start out in second gear. (I have a 5 speed) since all the weight is on the rear steering becomes very hard. Skis would make steering 100% better but we don't have that type of option. I would recommend putting sand bags up them in this @#$#@.. The salt will eat up the frames. My two cents. Jameel Sender: dmcnews@world.std.com Precedence: list Reply-To: dmcnews@world.std.com
On Sat, 2 Jan 1999, Scott Tester wrote:
> I have always wondered, how well does the DeLorean perform in snow and ice? > I figure since it is a rear engine - rear wheel drive that it would do very > well. I know that most of you put the D away for the winter, but if anyone > has any particular stories please share them.. > > Scott Tester testersd@helicon.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 16:18:59 -0700 From: scottmueller@zebra.net (Scott Mueller) Subject: DML: Re: Delorean and Snow
Back in 1982, a friend and myself drove the DeLorean up Mt. Hood outside of Portland during Thanksgiving. While rounding a long sweeping corner, the car spun 720 degrees and we slid of the road into a parking/scenic view area. I was lucky and did not cause any damage to my vehicle or to any others. The only damage was to my shorts, which were permenatley stained.
I hit a patch of ice and was probably going to fast for the road conditions. The DeLorean handles very well on smooth, dry roads. But, as with any other car, you need to slow down when the conditions are not perfect.
Scott Mueller DMC/ Das Mueller Companies Mobile, AL 1981/002981 DOA-5031 DMCNEWS Contact me about the "Deep South DeLorean Owners Club" http://www.zebra.net/~scottmueller/Web%20Page/aaanothe.htm Remember April 3, 1999 - Camillia Classic Car Show in Mobile Alabama
Date: Sunday, January 03, 1999 11:31 AM Subject: DML: Delorean and Snow
>I have always wondered, how well does the DeLorean perform in snow and ice? >I figure since it is a rear engine - rear wheel drive that it would do very >well. I know that most of you put the D away for the winter, but if anyone >has any particular stories please share them.. > >Scott Tester testersd@helicon.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Mon, 4 Jan 1999 00:05:06 +0100 From: "Carte Blanche Limousine" <carteblanche@franceplus.com> Subject: DML: Re: paint removel
Call Mr Martinaud in France at 00 33 1 47 82 01 31 who did the job very well on a dark red DMC coming from Kuwait. He owns a small workshop close to Paris and could also be reach at deloreanfr@geocities.com
Cyril Binet VIN 1807
- ---------- > De : kevin & ann miller <kamiller@alaska.net> > A : dmcnews@world.std.com > Objet : DML: paint removel > Date : dimanche 3 janvier 1999 04:27 > > I'm new to the Delorean world as I just purchased an 81 with the vin > #4556. I am in the process of removing the paint as it is painted red. > My problem is how to make the stainless look the way it did when it was > new? > Does anybody have any ideas? > Thanks for any help
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 23:58:48 +0100 From: "Carte Blanche Limousine" <carteblanche@franceplus.com> Subject: DML: Re: DOC Site Update
I also get the picture from Simon for the exhaust of my DMC and Custom chrome give me a price of 500# for the total kit if we buy 3 sets. Let me know if you are interested...
Cyril Binet VIN 1807
- ---------- > De : Martin Gutkowski (UK) <martin.is@connect-2.co.uk> > A : dmcnews@world.std.com > Objet : DML: DOC Site Update > Date : vendredi 1 janvier 1999 20:56 > > I have now uploaded the document regarding the custom free-flow exhaust > modifications Simon Lees-Milne had made for his DeLorean, including a > photograph of the manifolds. > > Best Wishes, > > Martin > > http://delorean.connect-2.co.uk/technical.htm
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 23:45:48 +0100 From: "Carte Blanche Limousine" <carteblanche@franceplus.com> Subject: DML: Re: Re: Re: DeLorean stereo
thank you to tell me where I can find the rear speakers easily. Does some big manufacturers do such speaker now ? I heard about Alpine or Rockford... Can you get some from USA for me in France ? I am also looking for a CRAIG radio. Does anyone konows ?
Cyril Binet VIN 1807
- ---------- > De : R. Starling <doctor280@email.msn.com> > A : dmcnews@world.std.com > Objet : DML: Re: Re: DeLorean stereo > Date : dimanche 3 janvier 1999 13:59 > > Joe wrote: > Marc, > There are four speakers, two 3 1/2" units in the dash and two 6X9's in the > interior rear quarter panels. > > I believe that there has been a mistake here. The two rear speakers are > 4X10's. > > Robert Starling, > Vin#5252
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 17:25:00 -0700 From: scottmueller@zebra.net (Scott Mueller) Subject: DML: Re: Deep South Delorean Club
Jeff, The "Deep South DeLorean Owners Club" is an informal group of DeLorean Owners and a couple of future owners. We have no bylaws, no dues, ect.. in fact, we may even change the name.
The club can be anything that you want it to be. We plan to gather again at the Camellia Classic being held on April 3, 1999 in Mobile, AL
Check my web page for more details or email me with any specific questions that you have.
Looking forward to meeting you in April.
Scott Mueller
Mobile, AL 1981/002981 DOA-5031 DMCNEWS Contact me about the "Deep South DeLorean Owners Club" http://www.zebra.net/~scottmueller/Web%20Page/aaanothe.htm Remember April 3, 1999 - Camillia Classic Car Show in Mobile Alabama
Date: Sunday, January 03, 1999 2:28 PM Subject: Deep South Delorean Club
>Scott, >I live in the Memphis area, and I am originally from Ft Walton Beach. I would >be interested in joining the club. The next closest one I know of is in >central Illinois. Please send information. >Thanks, >Jeff Cox >JCox4001@aol.com
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 18:49:20 EST From: KayoOng@aol.com Subject: Re: DML: Delorean and Snow (long)
Scott,
Driving in the snow? Better get a horse and sled ;>) DeLorean in the snow............... I now going on three years of ownership of my DeLorean. I have been driving it every day. EVERYDAY! From the hottest summer (100 degrees thru crawling city traffic), coldest and snow (except a major blizzard). The two best seasons for driving are spring and fall.
The DeLorean is rear engine so you will now feel the weight of the engine "swing" forward when braking on the snow and puddle of water. The front is light and this does not help in either.
Driving in the snow is murder with any car, especially in a DeLorean. It will tax you and the vehicle's abilities. Snow and rain mixed is SLUSH, this is the WORST. Make sure you have good snow tires or good deep threads on your tires. This is a problem with all vehicles especially "lighter" ones with wide tires. It just can't handle snow. Tire's thread can't bit into the snow to get traction.
When driving in the snow make sure you are alone on a lane with NO one around you either on the left or right side with ample room in the front and especially the rear. Make room if you must, slow down or give way. Do it intelligently, don't create an accident in doing so. If any out of control situation should happen you can react or have plenty of room to make all your corrections and adjustments to avoid any mishaps.
One of my many encounters with snow is when I went from New York City to Atlanta, Georgia on a business trip. Going down to Atlanta was a cold trip with little snow flurries every so and then. On the way back 3 days later, that was a major difference!
It start to snow heavy just as I got to the Virginia border and Washington, DC area. Heavy snow flakes coming down. It is going to become a blizzard. I got onto I-95 New Jersey Turnpike north bound heading home to New York City and there is at least 2 1/2 to 3 inches of snow and slush with more snow still falling to make visibility worst.
The SAFE top speed without slipping and slide was 45 to 50 mph with full control. Don't even try to push it and don't touch the brakes. Momentum is now the game with the constant feed from the wheels. If you hit the throttle the wheel spins for you but you are not going anywhere and you will "fish tail." You will lose control. You will hydroplane-float and spin!!! Not a good feeling. Some people look at my DeLorean as they sped by and they still want to drive by faster. They are annoyed or they have a "speed" fetish - -- sick people! They had a point to prove that their vehicle is now supreme when passing a "D". There were accidents left and right because of drivers like them in the snow. These are signs of poor drivers in judgement and poor handler of their cars. Or they maybe unlucky?
BTW I tried to even to create a situation WHERE THERE WAS NO ONE AROUND to see the behavior of my DeLorean. No, I am not reckless. I just want to see how the DeLorean behaves in the snow when fish tailing. This story is for another time.
Now give me my 1957 Bentley for the snow. Except for a sheet of ice, I can plow right through the same road with the snow with no problems. I have done this in the pass 25 years. No problems even at 60 mph for 2 inches of snow and up 70 mph for 3 inches of snow, and it is not a 4 X 4, it is close to 5,000 lbs in weight with me in it. Just be cautious of ice under the snow.
The Delorean has no speed and no luxury on the snow or rain. The DELOREAN IS A UNIQUE CAR IN ITS OWN WAY, the speed, the handling and other feelings are different then the Bentley or any other extoic cars for that matter. Drive your DeLorean or any vehicle in the snow safely and cautiously. Don't push it and watch out for all the Mario Andrews, the Al Unsers (speed demons) and the "craziess" on the road. They will do you in, not the snow.
If you must drive in the snow, slower is better. Don't drive in the snow is the best.
Drive safely and enjoy.
Kayo Ong #5508
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 18:53:43 -0500 From: "Watkins Family watbmv@megalink.net" <watbmv@megalink.net> Subject: DML: Matchbox Delorean Model
The small Matchbox sized Delorean is from a 1985 release called "Pacesetters". I have about 5 of them, a few still in the original packages. They were made by a company called Intex Recreation Corp out of Long Beach California. It was a 30 car series, and as you might guess the company did not want to sell "just" the Delorean car. If you wanted to order, you had to get a large order that was random in it's packing. There was no way of knowing which cars you would get. I tried in vain to get them to sell me a bunch of the Deloreans. I was lucky enough to have found mine at a Los Angeles grocery store toy section. I've yet to see it re-released. If anyone on the list who lives near Long Beach wants to find this place and drive up in their car and ask.........who knows???
Tom Watkins #5732
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 19:29:44 EST From: KayoOng@aol.com Subject: Re: DML: Theft prevention
You can temporary use the inertia switch to cut the fuel supply if you are in a situation where you feel the need for it. Just pull the plunger upwards on the inertia switch to cut off fuel pump. Before you start up the car press, the plunger downwards and hit the ignition. There is no adverse effect to the car or fuel system. Sender: dmcnews@world.std.com Precedence: list Reply-To: dmcnews@world.std.com
No gas, no go, can't go anywhere!
If you want to make a more permanent solution, you can cut the wire that supply the power to the fuel pump from the inertia switch. Add a new length of wire and a toggle switch in series and route this switch to a place somewhere that you can hide it from all others. Placement is your discretion. This will shut all fuel to the engine.
Switch is less then $4.00 with wire and 30 mins. to install it.
Problems? You must remember to toggle the switch to off when you leave the car. This is not automatic and you must do EVERYTIME when there is the need for it. When you are ready to start the car again? Toggle to on. Fuel pump with be operating again.
Don't want the switch? Don't like the switch? Remove switch and wire, reconnect the original wire. No harm done. Almost good as new.
Kayo Ong #05508 Lic 9D NY
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 19:48:29 EST From: KayoOng@aol.com Subject: Re: DML: Re: DeLorean stereo
You can fit up to 4" of speaker in the front. Best for the money and sound quality in the 4" sizes are Polks or JBL. Many other speakers sounds "hard" due the size and the installation area. They are right in front of you on the dash.
The rear speakers are a pain to get at and to mount a good pair of speakers. They will sound unbalance in relation to the 4" in the front. Replace the original 4" X 10" with 6" X 9."
The problem that still exist is poor sound distribution. Best thing to do without the over kill, the expense and ability to return the DeLorean to its original looks with little ado, is to cut the back of the facial board under the rear window. There is only about 4" to 5" X 12" approx. of cavity of good space to mount a speaker on each side. This cavities is also important in supporting the sound of the speaker you are mounting. That is all the room you have.
Have a good sound.
Kayo Ong #00508 Lic 9D NY
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 19:53:48 -0700 (MST) From: raddad@cmn.net Subject: DML: Re: Horns - was - Jubilation!
I replaced mine with Hella's from Griot's Garage. Yes, they are those annoying screechy German sounding horns, but I don't toot them for music, but to get attention. They are much louder and they do get attention. They are also very compact and fit into the area of the orignal horns very nicely,.
Dick Ryan VIN 16867
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 20:00:26 -0700 (MST) From: raddad@cmn.net Subject: Re: DML: Delorean and Snow
Scott
I have driven my D in snow and on ice. It's tricky. Yes, you do have more traction with the weight in the rear, but the already light front end can really come loose easily. While we all talk about how little HP our cars have, I find that the D spins the wheel much too easily on slippery snow or ice.
The other problem with the D in the winter, at least where I live, is that it is much lower than the windrows of snow created by the plows. Thus, at intersections you need to be VERY careful becuase the other folks can't see you until they are right on you. Scary!!
Dick Ryan VIN 16867 - ---------------------------------------------- >I have always wondered, how well does the DeLorean perform in snow and >ice? >I figure since it is a rear engine - rear wheel drive that it would do >very >well. I know that most of you put the D away for the winter, but if anyone >has any particular stories please share them.. > >Scott Tester testersd@helicon.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 3 Jan 1999 21:40:09 -0600 From: Bryan Pearce <bryan@denebcorp.com> Subject: DML: DeLorean and Snow
Scott Tester questioned:
>I have always wondered, how well does the DeLorean perform in snow and >ice?
As a year round driver, I can tell you that the DeLorean does well on snow and ice with the exception of taking corners. You have to be careful not to let the front end let go or you could be in big trouble. Also, good tires are critical.
Funny Story:
Shortly after I purchased my first DeLorean in 1990, we had about six inches of snow. Since I was a new DeLorean owner, I just had to drive my DeLorean in the snow without paying any attention to the bald rear tires. I took a turn a little too fast and found the rear of the car passing me on a four lane road sliding down hill. As the DeLorean spun round and round while sliding down this hill and crossing all lanes of traffic, I remember thinking that the other drivers of the road must have been saying, "Here's something you don't see everyday!".
Anyway, I still don't know how I managed not to hit anyone or have anyone hit me. Once the car came to rest, I drove straight home and waited for the roads to be cleared before going for new tires.
Bryan Pearce DeLorean Midwest Connection VIN #11529 - The only DMC-12 with a Stainless Steel Frame http://www.pearce-design.com
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 23:08:17 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: paint removel
Short of paint remover and sand paper which will not leave the Stainless Steel looking Factory, The only solution I could think of is to remove all your Stainless Steel panels and send them to someone who can dip the entire part for stripping. Some people who come to mind:
1) Furniture strippers, some of these people have tanks big enough for
entire tables.
2) Industrial painters, particularly the people who paint bridge parts.
They in turn
sometimes have to remove a bad paint job.
3) Platers, these people sometimes have to dip entire parts for aircraft
landing for
stripping and cleaning.
This is a tough task, get your hands on a recent edition of the "Thomas Register" and look for strippers in there close to you vicinity. The "Thomas Regional Director" is a good starting point also.
Paul Gress Vin 10193
kevin & ann miller wrote:
> I'm new to the Delorean world as I just purchased an 81 with the vin > #4556. I am in the process of removing the paint as it is painted red. > My problem is how to make the stainless look the way it did when it was > new? > Does anybody have any ideas? > Thanks for any help >
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 23:12:10 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: SS Exhaust
PJ Grady has a pair of Stainless Steel Headers in their display case. I also know he installed a pair in his car. I don't know if their still avalable, but if your interested give him a call at (516) 589-6224.
Paul Gress Vin 10193
Jim Lill wrote:
> Here's an interesting page for owners of DeLorean and other older cars: > > http://www2.tomato.ne.jp/~pwj/ex.list.html > > The Japanese makes it a little tricky but I think the exhuast is made by > > PD GOUGH & ASSOCIATE probably a UK outfit
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 23:14:40 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: Theft prevention
I've heard that a slim jim will not work on a Delorean.
Paul Gress Vin 10193
James DeBroeck wrote:
> A quick question: > Does the gullwing design on the DeLorean make it any easier/harder for a = > criminal to steal it? > I would hate to leave my future purchase in a parking lot for a little = > while and return to find it damaged or missing. > > James DeBroeck
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 23:28:27 -0500 From: Paul Gress <pgress@pb.net> Subject: Re: DML: ok, here's an easy question...
If you've done this already then the fan motor is not grounded at all, so the only rick you will have is if something of ground potential touches the outer housing of the fan motor, then you will have a short circuit and blow the fuse. Also these motor are available and not to expensive, maybe you should just replace it with the correct motor.
Paul Gress Vin 10193
Gerald Deutsch wrote:
> I now know why my ventilation fans inside don't blow much air. The fan = > is a replacement piece (not installed by me) and it spins backwards. It = > will spin the right way if I swap the hot and ground wires on the fan = > itself. My question is, if I swap them, can this hurt my car in any way? = > Because, it would just be reversing the current flow and make the hot = > terminal a ground and the ground terminal the hot, right? I'm just = > concerned because there are so many ground wires going to the motor. = > Does anyone know if this will hurt my car? Thanks. > ---Dan
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 21:57:14 PST From: "Marc Barth" <d16y8@hotmail.com> Subject: DML: Changes over the three years at DMC
If I understand correctly there were three different hoods that evolved over the 3 years. The first had some nicer lines than the latter hoods but required opening the trunk in order the fill the gas tank, right? The second was a straight hood but didn't require the lifting of the trunk. The final actually had "De Lorean" logo towards the front drivers side headlight. Am I correct in these statements? Did I miss any details especially regarding the third hood? Also does anybody know at what point these changes took place? Does anybody know the beginning and ending vin # for these changes? Thanks for all the info.
Marc d16y8@hotmail.com
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Sun, 03 Jan 1999 22:06:07 PST From: "Marc Barth" <d16y8@hotmail.com> Subject: DML: Interior specs
How much room is there behind the seats if the seats are pushed back all the way? Is there a couple of inches of space, a small cubby space, or is it flush against the back of the vehicle? How much clearance is there under the seats?
Marc d16y8@hotmail.com
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Mon, 4 Jan 1999 00:53:46 -0500 From: "DMC Joe" <DMCJOE@worldnet.att.net> Subject: DML: Re: Theft prevention
James, Much harder ! The double latch, lock, and release set up is very complex making it almost impossible to open the gullwing doors without a key. If a thief wants to get into a DeLorean he will need to smash a window.
DMC Joe / DeLorean Services / dmcjoe@att.net
- ---------- > From: James DeBroeck <executor@mail.usmo.com> > To: dmcnews@world.std.com > Subject: DML: Theft prevention > Date: Saturday, January 02, 1999 11:51 PM > > A quick question: > Does the gullwing design on the DeLorean make it any easier/harder for a = > criminal to steal it? > I would hate to leave my future purchase in a parking lot for a little = > while and return to find it damaged or missing. > > James DeBroeck
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Mon, 4 Jan 1999 00:56:12 -0500 From: "DMC Joe" <DMCJOE@worldnet.att.net> Subject: DML: Re: ok, here's an easy question...
Gerald, Swapping the wires will not do any harm as a matter of fact this procedure is standard whenever replacing this motor.
DMC Joe / DeLorean Services / dmcjoe@att.net
- ---------- > From: Gerald Deutsch <Jerry1@eclipse.net> > To: 'dmcnews@world.std.com' > Subject: DML: ok, here's an easy question... > Date: Saturday, January 02, 1999 9:32 PM > > I now know why my ventilation fans inside don't blow much air. The fan = > is a replacement piece (not installed by me) and it spins backwards. It = > will spin the right way if I swap the hot and ground wires on the fan = > itself. My question is, if I swap them, can this hurt my car in any way?
> Because, it would just be reversing the current flow and make the hot = > terminal a ground and the ground terminal the hot, right? I'm just = > concerned because there are so many ground wires going to the motor. = > Does anyone know if this will hurt my car? Thanks. > ---Dan
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Mon, 4 Jan 1999 01:08:41 -0500 From: "DMC Joe" <DMCJOE@worldnet.att.net> Subject: DML: CORRECTION
CORRECTION, Sorry for the misinformation, the rear speakers are 4X10 not 6X9 as I stated. BTW if you are considering replacing those speakers, forget it! They are not baffle mounted, therefore no matter what speaker you install you will only have minimum bass response. A much better choice providing better sound and easier installation is placing speakers in the panel just below the rear window. See Kayo Ong's post from yesterday for detials.
DMC Joe / DeLorean Services / dmcjoe@att.net
- ---------- > > thank you to tell me where I can find the rear speakers easily. Does some > big manufacturers do such speaker now ? I heard about Alpine or > Rockford... > Can you get some from USA for me in France ? I am also looking for a > CRAIG radio. Does anyone konows ? > > Cyril Binet VIN 1807 > > ---------- (SNIP) > > > > I believe that there has been a mistake here. The two rear speakers are > > 4X10's. > > > > Robert Starling, > > Vin#5252
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
Date: Mon, 4 Jan 1999 09:26:35 -0600 From: "Duke" <at88mph@mobis.com> Subject: Re: DML: Re: Dash Cover
Mike,
Yes it does cover the top of the center console. It takes about 3-5 days for it to conform to the dash but it is cut perfectly. It also doesn't cover up your defroster vents at the top of the dash. I wedged mine in at the top of the dash and into the side pillars so I didn't have to use the Velcro. I am very happy with mine.
Hope this helps,
- -----Original Message----- From: mike atkinson <mikeatk@concentric.net> To: dmcnews@world.std.com <dmcnews@world.std.com> Date: Sunday, January 03, 1999 1:33 PM Subject: Re: DML: Re: Dash Cover
>Hi Duke, > > >Duke wrote: > >> Mike, >> >> I ordered mine about 2 or 3 months ago from a company called "Dashmat" and >> it fits perfect! I believe it costs $15 or $20 but is well worth it. >> They even have a website: www.dashmat.com or you can call them at >> 1-800-DASHMAT. >> >> Hope this helps, >> >> Duke >> > >Do their dash mats cover the top of the center console, I would prefer >that >since I've seen them both ways. > >Thanks > >Mike Atkinson > >mikeatk@concentric.net
Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
------------------------------
End of dmcnews-digest V3 #463 *****************************
Postings to the DELOREAN MAILING LIST are the opinions of the author and not necessarily those of the list moderator or his Internet Service Provider(s). The list moderator makes every effort to screen out false, misleading, and negative postings, but it is up to you to realize that nothing should be taken as actual fact without research and investigation of your own. Send postings to "dmcnews@world.std.com" Before posting, search the archives! www.dmcnews.com/search.html Thank you!
Go to previous digest | Go to next
digest.
Back
to DeLorean Mailing List Page.
Return to Back Issues page.
Search the back issues.
Having problems with these pages? Have a good idea for the back Issues? Email me at: backissues@dmcnews.com
Member of the LinkExchange