SERVICE BULLETIN NUMBER ST-01-1/82

CATEGORY:   TECHNICAL

ATTENTION:  ALL DMC DEALERS/SERVICE MANAGERS

SUBJECT:    FRAME DIMENSIONS AND REFERENCE POINTS


In the event a De Lorean is involved in a collision,
the following frame dimensions are provided to assist
in determining the extent of frame damage.

Please inform all personnel concerned.




Doyle J. Potter
National Service/Parts
   Training Manager

DJP:mtc
















                                         (over)



                                          Issued 1/22/82

                                                 Bulletin ST-01-1/82













ALL BODY MOUNTS = CENTER POINT

A  2552.0mm (100.47 in.)    Front suspension tower center to rear suspension tower center.
B  2777.0mm (109.33 in.)    Suspension towers diagonal dimension (at shock absorbers upper
                            mountings).
C  1105.0mm (43.62 in.)     Front shock absorbers upper mounting centers.
D  1060.0mm (41.73 in.)     Rear shock absorbers upper mounting centers.
E  941.0mm (37.05 in.)      Front shock absorber upper mounting to #2 body mount.
F  635.0mm (25.0 in.)       #2 body mount to #3 body mount.
G  976.0mm (38.45 in.)      #3 body mount to rear shock absorber upper mounting.
H  85.0mm (3.35 in.)        Rear upper link inner mounting to #4 body mount.
I  436.0mm (17.17 in.)      Datum base line to top of rear frame extension.
J  484.0mm (19.05 in.)      Datum base line to top of rear suspension cover.
K  644.0mm (25.35 in.)      Center line of rear suspension tower (at shock upper mounting)
                            to rear of frame.
L  729.1mm (28.70 in.)      Center line of trailing arm pivot to center line of rear suspension
                            tower (at shock upper mounting).  NOTE:   To be measured along
                            datum base line.
M  118.0mm (4.64 in.)       Front suspension cross member center line to steering rack rear
                            mounting holes.
N  207.9mm (8.18 in.)       Pivot upper control arm mounting to center line of lower control
                            arm pivot mounting.
O  200.25mm (7.88 in.)      Upper control arm rear pivot mounting to center line of lower
                            control arm pivot mounting.
P  760.0mm (29.92 in.)      Center line reference hole rear engine cross member to chassis
                            rear extension.